Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 2011 Volkswagen Jetta Base (5K). Part number W0503. Listed for FWD cars. It goes on the front of the vehicle. In the box: 4 bushings and 2 tubes.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. An alignment is required after installation. To go with it on the Jetta, see Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front and Rear Sway Bar Kit.
Features
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Material: The part is made of polyurethane.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Finish: A powder coated finish resists corrosion and wear.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
Specifications
| Part Number | W0503 |
| Part Name | Control Arm Bushing |
| Vehicle | 2011 Volkswagen Jetta Base |
| Chassis Code | 5K |
| Drivetrain | FWD |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 37 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |




