Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 2010-2011 Volvo S40 T5 R-Design (P1). Chassis code: P1. It goes on the front of the vehicle. The kit contains 4 bushings and 2 tubes. Whiteline part number: W53286.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. Plan on a wheel alignment afterward. To go with it on the Volvo S40, see Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Adjustable Front Sway Bar Link.
Features
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Finish: A powder coated finish resists corrosion and wear.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Material: Built from polyurethane.
- Corrosion protection: Rust protection comes from plating on the metal parts.
Specifications
| Part Number | W53286 |
| Part Name | Control Arm Bushing |
| Vehicle | 2010-2011 Volvo S40 T5 R-Design |
| Drivetrain | FWD/AWD |
| Chassis Code | P1 |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



