Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 2008-2009 Volkswagen Rabbit S (1K). It goes on the front of the vehicle. Whiteline part number: W0503. Drivetrain: FWD. In the box: 4 bushings and 2 tubes.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. Plan on a wheel alignment afterward. To go with it on the Rabbit, see Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Adjustable Sway Bar Vehicle Link Kit.
Features
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Material: Built from polyurethane.
- Finish: Powder coat finish guards the metal against chips and corrosion.
Specifications
| Part Number | W0503 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2009 Volkswagen Rabbit S |
| Chassis Code | 1K |
| Drivetrain | FWD |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 37 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |




