Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2008-2009 Volkswagen Rabbit S (1K). You receive 2 links. The part number is KLC141. Whiteline's note for this fit: Suits models with control arm link mount: adjustable extra heavy duty. It goes on the rear of the vehicle.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this rear link is built to keep that connection firm. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Expect an easy job of about 1 hour. No alignment is needed afterward. Other Whiteline parts we list for the Rabbit: Adjustable Rear Upper Control Arm Set, Adjustable Sway Bar Vehicle Link Kit, and Adjustable Front Sway Bar Link.
Features
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Install guide: An install guide comes in the box.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Hardware: Also in the box: locking nuts and washers.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
Specifications
| Part Number | KLC141 |
| Part Name | Sway Bar Link |
| Vehicle | 2008-2009 Volkswagen Rabbit S |
| Chassis Code | 1K |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 115-140 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Suits models with control arm link mount - adjustable extra heavy duty. Length 110-135mm |



