Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 2004-2018 Volkswagen Jetta GLI, TDI (1K/5K/A7). Whiteline part number: W0503. It fits FWD models. You receive 4 bushings and 2 tubes. It goes on the front of the vehicle.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. An alignment is required after installation. To go with it on the Jetta, see Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front and Rear Sway Bar Kit.
Features
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Material: Built from polyurethane.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
Specifications
| Part Number | W0503 |
| Part Name | Control Arm Bushing |
| Vehicle | 2004-2018 Volkswagen Jetta GLI, TDI |
| Chassis Code | 1K/5K/A7 |
| Drivetrain | FWD |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 37 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



