Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 1988-1990 Mazda RX-7 GTU (FC). You receive 4 bushings and 2 tubes. Order it as part number W51961. Position: front.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. Get the car aligned once it is back on the ground. We also list 12mm Adjustable Front Camber Bolts, Tie Rod Boot Kit, and Rear Upper Outer Control Arm Bushing Kit for the RX-7.
Features
- Grease: Moly grease is supplied to prolong the life of the parts.
- Material: The part is made of polyurethane.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Easy to fit: Designed for an easy install with ordinary shop equipment.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
Specifications
| Part Number | W51961 |
| Part Name | Control Arm Bushing |
| Vehicle | 1988-1990 Mazda RX-7 GTU |
| Chassis Code | FC |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 40.1 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |

