Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 1987-1990 Mazda RX-7 GXL 2+2 (FC). Part number W51961. Chassis code: FC. Position: front. The kit contains 4 bushings and 2 tubes.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. Plan on a wheel alignment afterward. To go with it on the RX-7, see 12mm Adjustable Front Camber Bolts, Tie Rod Boot Kit, and Rear Upper Outer Control Arm Bushing Kit.
Features
- Easy to fit: Made with the installer in mind, so it goes in without special equipment.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Material: Made from polyurethane.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Grease: Moly grease is supplied to prolong the life of the parts.
Specifications
| Part Number | W51961 |
| Part Name | Control Arm Bushing |
| Vehicle | 1987-1990 Mazda RX-7 GXL 2+2 |
| Chassis Code | FC |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 40.1 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |


