Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 1986-1991 Mazda RX-7 Base, Turbo (FC). In the box: 4 bushings and 2 tubes. Whiteline part number: W51961. Position: front.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. An alignment is required after installation. We also list 12mm Adjustable Front Camber Bolts, Tie Rod Boot Kit, and Rear Upper Outer Control Arm Bushing Kit for the RX-7.
Features
- Grease: Moly grease is supplied to prolong the life of the parts.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Easy to fit: Designed for an easy install with ordinary shop equipment.
- Material: The part is made of polyurethane.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W51961 |
| Part Name | Control Arm Bushing |
| Vehicle | 1986-1991 Mazda RX-7 Base, Turbo |
| Chassis Code | FC |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 40.1 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |


