Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (14mm ID) fits the 2010-2012 Dodge Caliber. It goes on the front of the vehicle. The kit contains 4 bushings and 2 tubes. It is listed for the PM chassis. Part number W0593.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated difficult, with about 2.5 hours of work listed. An alignment is required after installation. To go with it on the Caliber, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Front Sway Bar Link.
Features
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Material: Built from polyurethane.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Finish: Powder coating covers the metal for protection against chips and rust.
Specifications
| Part Number | W0593 |
| Part Name | Control Arm Bushing |
| Vehicle | 2010-2012 Dodge Caliber Express, Heat, Mainstreet, Rush, Uptown |
| Chassis Code | PM |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 34.7 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |