Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (14mm ID) fits the 2012-2013 Dodge Journey AVP (JC49). It goes on the front of the vehicle. In the box: 4 bushings and 2 tubes. Order it as part number W0593.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. An alignment is required after installation. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Front Sway Bar Link for the Journey.
Features
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Material: The part is made of polyurethane.
- Corrosion protection: The hardware is plated to stand up to road conditions.
Specifications
| Part Number | W0593 |
| Part Name | Control Arm Bushing |
| Vehicle | 2012-2013 Dodge Journey AVP |
| Drivetrain | FWD/AWD |
| Chassis Code | JC49 |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 34.7 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



