Product Details
This Whiteline Front Control Arm Lower Outer Bushing fits the 1977-1979 Mazda GLC DX (FA4). In the box: 4 bushings. Order it as part number W21082. Placement: front.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect an easy job of about 1.5 hours. Get the car aligned once it is back on the ground.
Features
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Material: Built from polyurethane.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
Specifications
| Part Number | W21082 |
| Part Name | Control Arm Bushing |
| Vehicle | 1977-1979 Mazda GLC DX |
| Chassis Code | FA4 |
| Bushing 1 Inner Diameter | 17 mm |
| Bushing 1 Length | 23 mm |
| Bushing 1 Outer Diameter | 27.5 mm |
| Bushing 2 Inner Diameter | 17 mm |
| Bushing 2 Length | 23 mm |
| Bushing 2 Outer Diameter | 27.5 mm |
| Bushing Quantity | 4 |
| Grade Type | Regular |
| Grease Fitting Included | No |
| Inside Diameter | 17 mm |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1.5 |
| Kit Contents | 4 Bushings |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 27.5 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



