Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing (14mm ID) fits the 2005-2006 Mitsubishi Outlander Limited (CU). Part number W0593. In the box: 4 bushings and 2 tubes. Placement: front.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. An alignment is required after installation. To go with it on the Outlander, see 14mm Adjustable Front Camber Bolts and Rear Differential Mount Bushing Kit.
Features
- Grease: Moly grease is supplied to prolong the life of the parts.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Material: The part is made of polyurethane.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | W0593 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005-2006 Mitsubishi Outlander Limited |
| Drivetrain | FWD/AWD |
| Chassis Code | CU |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 34.7 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



