Product Details
This Whiteline Front Lower Control Arm Bushing Kit fits the 2005-2010 Chrysler 300C Base, Limited, Touring (LX). The kit contains 2 shell bushings and 2 tubes. Placement: front. The part number is W53336.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. Plan on a wheel alignment afterward. Other Whiteline parts we list for the 300C: Rear Subframe Mount Bushing, Front and Rear Sway Bar Kit, and Rear Trailing Arm Lower Front Bushing.
Features
- Material: Built from polyurethane.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Install guide: Step-by-step installation instructions come with it.
Specifications
| Part Number | W53336 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005-2010 Chrysler 300C Base, Limited, Touring |
| Drivetrain | RWD/AWD |
| Chassis Code | LX |
| Bushing 1 Inner Diameter | 14.2 mm |
| Bushing 1 Outer Diameter | 69.7 mm |
| Bushing 2 Outer Diameter | 66.6 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



