Product Details
This Whiteline Front Lower Control Arm Bushing Kit fits the 2005-2010 Chrysler 300 SRT8 C (LX). Position: front. Order it as part number W53336. You receive 2 shell bushings and 2 tubes.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated difficult, with about 2.5 hours of work listed. An alignment is required after installation. To go with it on the 300 SRT8, see Rear Subframe Mount Bushing, Front and Rear Sway Bar Kit, and Rear Trailing Arm Lower Front Bushing.
Features
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Material: Made from polyurethane.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Corrosion protection: Rust protection comes from plating on the metal parts.
Specifications
| Part Number | W53336 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005-2010 Chrysler 300 SRT8 C |
| Drivetrain | RWD |
| Chassis Code | LX |
| Bushing 1 Inner Diameter | 14.2 mm |
| Bushing 1 Outer Diameter | 69.7 mm |
| Bushing 2 Outer Diameter | 66.6 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



