Product Details
These Whiteline 12mm Adjustable Front Camber Bolts fit the 2010-2019 Chevrolet Cruze Eco, LS, LT, LTZ (Delta II/D2XX). Whiteline's note for this fit: Adds +/- 0.75 degrees Camber. Position: front. Part number KCA412. You receive 2 bolts.
Camber is how far the top of the wheel leans in or out when you look at the car from the front, and it decides how the tire meets the road. Many cars leave little or no room to change it at the factory. A camber bolt replaces a standard mounting bolt with an adjustable one, so an alignment shop can move the setting into a better range.
Expect a difficult job of about 1 hour. An alignment is required after installation. To go with it on the Cruze, see Adjustable Front Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and Heavy Duty Blade Adjustable 22mm Rear Sway Bar.
Features
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Locking washer: A toothed lock washer secures the adjustment.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Install guide: Step-by-step installation instructions come with it.
- Hardware: The matching nuts are included.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 2010-2019 Chevrolet Cruze Eco, LS, LT, LTZ |
| Drivetrain | FWD |
| Chassis Code | Delta II/D2XX |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |




