Product Details
These Whiteline 14mm Adjustable Front Camber Bolts fit the 2008-2014 Subaru Tribeca Limited (WX). The kit contains 2 bolts. Position: front. The part number is KCA414. Application note: Adds +/- 0.75 degrees Camber.
Camber is how far the top of the wheel leans in or out when you look at the car from the front, and it decides how the tire meets the road. Many cars leave little or no room to change it at the factory. A camber bolt replaces a standard mounting bolt with an adjustable one, so an alignment shop can move the setting into a better range.
Expect a difficult job of about 1 hour. An alignment is required after installation. We also list Front Control Arm Lower Inner Front Bushing and Rear Toe Arm Inner Bushing for the Tribeca.
Features
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Hardware: The matching nuts are included.
- Locking washer: The teeth on the lock washer keep the bolt from turning once it is tightened.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Install guide: Whiteline packs an install guide with it.
Specifications
| Part Number | KCA414 |
| Part Name | Camber Bolt |
| Vehicle | 2008-2014 Subaru Tribeca Limited |
| Chassis Code | WX |
| Adjustable | Yes |
| Bolt Thread Diameter | 14 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |



