Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 2008-2014 Subaru Tribeca. The part number is W0506. Included: 4 bushings and 2 tubes. It is listed for the WX chassis. Position: front.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. An alignment is required after installation. Other Whiteline parts we list for the Tribeca: 14mm Adjustable Front Camber Bolts and Rear Toe Arm Inner Bushing.
Features
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Material: The part is made of polyurethane.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
Specifications
| Part Number | W0506 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2014 Subaru Tribeca |
| Chassis Code | WX |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 37.4 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |
Fitment for Tribeca control arm bushings
Fits the 2008-2014 Subaru Tribeca. Each model year is listed below.