Product Details
Here are the Whiteline 14mm Adjustable Front Camber Bolts for the 2008-2009 Subaru Tribeca Base (WX). Position: front. Application note: Adds +/- 0.75 degrees Camber. In the box: 2 bolts. Whiteline part number: KCA414. The listing names the Base trim.
Alignment problems often come down to one angle the factory settings cannot reach. After a car is lowered, fitted with different wheels, or simply gets older, camber can drift outside the range a shop is able to correct. These bolts swap in for the originals and give the technician the extra movement needed.
Expect a difficult job of about 1 hour. Plan on a wheel alignment afterward. Working on the same car? We also list Front Control Arm Lower Inner Front Bushing for the Tribeca.
Features
- Hardware: Nuts are supplied with the bolts.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Locking washer: A toothed lock washer holds the setting without relying on friction alone.
- Install guide: Instructions for fitting are packed in the box.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
Specifications
| Part Number | KCA414 |
| Part Name | Camber Bolt |
| Vehicle | 2008-2009 Subaru Tribeca Base |
| Chassis Code | WX |
| Adjustable | Yes |
| Bolt Thread Diameter | 14 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |