Product Details
This Whiteline Front and Rear Sway Bar Link fits the 2002-2007 Subaru Impreza WRX Base (GD/GG). The kit contains 4 links, 8 bolts, 16 washers, and 8 nuts. Whiteline's note for this fit: Suits steel arms. Front & Rear Vehicle Set: Boxed Contains KLC26 & KLC30. Position: front and rear. Part number KLC31.
A sway bar link is the short rod that ties each end of the front and rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system.
Installation is rated easy, with about 1 hour of work listed. It does not require a wheel alignment. Other Whiteline parts we list for the Impreza WRX Base: Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and Front and Rear Sway Bar Kit.
Features
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
- Finish: A powder coated finish resists corrosion and wear.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Install guide: Step-by-step installation instructions come with it.
Specifications
| Part Number | KLC31 |
| Part Name | Sway Bar Link |
| Vehicle | 2002-2007 Subaru Impreza WRX Base |
| Drivetrain | AWD |
| Chassis Code | GD/GG |
| Bushing Material | Polyurethane |
| Grade Type | Performance |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 4 Links, 8 Bolts, 16 Washers, 8 Nuts |
| Length | 100 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Suits steel arms. Front & Rear Vehicle Set - Boxed Contains KLC26 & KLC30 |



