Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2002-2007 Subaru Impreza WRX Base (GD/GG). It goes on the front of the vehicle. Whiteline's note for this fit: Adds 0.5 degrees Caster & Anti-Lift. Chassis code: GD/GG. Included: 2 housings, 12 spacers, 4 bolts, and 6 washers. Part number KCA359.
This kit does more than replace rubber. Its offset design moves the pivot point of the lower control arm to add positive caster and change how the front end resists dive under braking, which improves straight-line stability and turn-in feel.
Expect a difficult job of about 2.5 hours. Plan on a wheel alignment afterward. We also list Front and Rear Sway Bar Kit, Front Steering Rack And Pinion Mount Bushing, and Performance Lowering Spring Kit for the Impreza WRX Base.
Features
- Install guide: Step-by-step installation instructions come with it.
- Caster: Caster is optimized for stable steering and good contact through roll.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Bump steer: Helps cut bump steer for steadier steering over bumps.
- Hardware: Hardware supplied: mounting hardware.
- Material: Built from polyurethane.
Specifications
| Part Number | KCA359 |
| Part Name | Control Arm Bushing |
| Vehicle | 2002-2007 Subaru Impreza WRX Base |
| Drivetrain | AWD |
| Chassis Code | GD/GG |
| Bushing 1 Inner Diameter | 20 mm |
| Bushing 1 Length | 52.5 mm |
| Bushing 1 Outer Diameter | 39.5 mm |
| Bushing 2 Inner Diameter | 20 mm |
| Bushing 2 Length | 52.5 mm |
| Bushing 2 Outer Diameter | 39.5 mm |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Housings, 12 Spacers, 4 Bolts, 6 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | Yes |
| Outside Diameter | 39.5 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5 Degrees Caster & Anti-Lift |




