Product Details

This Whiteline Caster/Camber Offset Front Strut Mount Kit fits the 2012-2019 Volkswagen Passat (B7/B8). Application note: Adds .5 degrees caster/-1.0 degrees camber. Included: 2 strut mounts. Whiteline part number: KCA476. It goes on the front of the vehicle.

Many strut-based cars have no built-in adjustment for caster and camber. Offset top mounts are a simple way to add some, using a part that takes the place of the original mount.

Expect a moderate job of about 2 hours. Get the car aligned once it is back on the ground. We also list Adjustable Rear Upper Control Arm Set, Adjustable Front Sway Bar Link, and Front Control Arm Lower Inner Front Bushing for the Passat.

Features

  • Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
  • Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
  • Easy to fit: Made with the installer in mind, so it goes in without special equipment.
  • Grease: Moly grease is supplied to prolong the life of the parts.
  • Install guide: Instructions for fitting are packed in the box.
Specifications
Part Number KCA476
Part Name Caster/Camber Strut Mounts
Vehicle 2012-2019 Volkswagen Passat
Chassis Code B7/B8
Installation Difficulty Moderate
Installation Time (hrs) 2
Kit Contents 2 Strut Mounts
Vehicle Placement Front
Wheel Alignment Required Yes
Notes Adds .5deg caster/-1.0deg camber

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2012VolkswagenPassatFWDAdds .5deg caster/-1.0deg camber
2013VolkswagenPassatFWDAdds .5deg caster/-1.0deg camber
2014VolkswagenPassatFWDAdds .5deg caster/-1.0deg camber
2015VolkswagenPassatFWDAdds .5deg caster/-1.0deg camber
2016VolkswagenPassatFWDAdds .5deg caster/-1.0deg camber
2017VolkswagenPassatFWDAdds .5deg caster/-1.0deg camber
2018VolkswagenPassatFWDAdds .5deg caster/-1.0deg camber
2019VolkswagenPassatFWDAdds .5deg caster/-1.0deg camber

Customer Reviews

Questions & Answers