Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2012 Volkswagen Passat (B7). Placement: front. Application note: Adjustable Extra Heavy Duty. The part number is KLC167A. In the box: 2 links.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. We also list Adjustable Rear Upper Control Arm Set, Front Control Arm Lower Inner Front Bushing, and Heavy Duty Blade Adjustable 24mm Rear Sway Bar for the Passat.
Features
- Construction: High-strength alloy gives the strength needed without much weight.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Hardware: The kit includes locking nuts and washers.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
Specifications
| Part Number | KLC167A |
| Part Name | Sway Bar Link |
| Vehicle | 2012 Volkswagen Passat |
| Chassis Code | B7 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 320-345 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 320-345mm. Bolt Diameter 12mm. |



