Product Details
This Whiteline Adjustable Rear Sway Bar Link Kit fits the 2018-2022 Toyota C-HR (X10). The part number is KLC242. In the box: 2 links. Position: rear. Chassis code: X10.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. A wheel alignment is not required. Other Whiteline parts we list for the C-HR: Front Sway Bar Link Kit, 17mm Adjustable Front Camber Bolts, and Adjustable Rear Lower Toe Arm Set.
Features
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Install guide: Step-by-step installation instructions come with it.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Material: Aluminum Alloy construction.
Specifications
| Part Number | KLC242 |
| Part Name | Sway Bar Links |
| Vehicle | 2018-2022 Toyota C-HR |
| Drivetrain | FWD |
| Chassis Code | X10 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |

