Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2011 Chevrolet Camaro ZL1. Whiteline's note for this fit: Adjustable Extra Heavy Duty. Order it as part number KLC144. This part is for the rear of the vehicle. Included: 2 links. The listing names the ZL1 trim.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. No alignment is needed afterward. Working on the same car? We also list Rear Subframe Mount Bushing, Front and Rear Sway Bar Kit, and Front Steering Rack And Pinion Mount Bushing for the Camaro.
Features
- Hardware: The kit includes locking nuts and washers.
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Install guide: Step-by-step installation instructions come with it.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
Specifications
| Part Number | KLC144 |
| Part Name | Sway Bar Link |
| Vehicle | 2011 Chevrolet Camaro ZL1 |
| Chassis Code | Zeta |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt Diameter 10mm. |