Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2009-2016 BMW Z4 (E89). You receive 2 links and 8 washers. Application note: Adjustable extra heavy duty. Whiteline part number: KLC154. It goes on the front of the vehicle. Chassis code: E89.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this front link is built to keep that connection firm. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. To go with it on the BMW Z4, see Rear Sway Bar Link, Rear Trailing Arm Lower Front Bushing, and Front Lower Radius Arm Bushing.
Features
- Construction: High-strength alloy gives the strength needed without much weight.
- Hardware: Also in the box: locking nuts and washers.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
Specifications
| Part Number | KLC154 |
| Part Name | Sway Bar Link |
| Vehicle | 2009-2016 BMW Z4 |
| Chassis Code | E89 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 290-315 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 290-315mm. Bolt diameter 10mm. |

