Product Details
This Whiteline Adjustable Front Sway Bar Link Adjustable fits the 2014-2019 Toyota Corolla (E170/E180). Order it as part number KLC169. Application note: Adjustable Extra Heavy Duty. Position: front. Included: 2 links.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. Other Whiteline parts we list for the Corolla: 17mm Adjustable Front Camber Bolts, Front Lower Inner Rear Control Arm Bushing Kit, and 22.2mm Front Sway Bar Mount Bushing Kit.
Features
- Hardware: Also in the box: locking nuts and washers.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
- Install guide: Instructions for fitting are packed in the box.
Specifications
| Part Number | KLC169 |
| Part Name | Sway Bar Link |
| Vehicle | 2014-2019 Toyota Corolla |
| Chassis Code | E170/E180 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 270-295mm. Bolt Diameter 10mm. |


