Whiteline Adjustable Front Sway Bar Link (225-250mm Length) for 2013-2016 Scion FR-S Base (ZN6)

Product Details

This Whiteline Adjustable Front Sway Bar Link (225-250mm Length) fits the 2013-2016 Scion FR-S Base. Trim named on the listing: Base. Order it as part number KLC179. It goes on the front of the vehicle. You receive 2 links. Whiteline's note for this fit: Adjustable Extra Heavy Duty.

The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.

Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. Working on the same car? We also list Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts for the FR-S.

Features

• Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
• Construction: High-strength alloy gives the strength needed without much weight.
• Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
• Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
• Hardware: Supplied with locking nuts and washers.
• Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.

Specifications