Product Details
These Whiteline Adjustable Front Sway Bar Drop Links fit the 2008-2015 Mitsubishi Lancer Evolution GSR. In the box: 2 links. Application note: Adjustable Extra Heavy Duty. This part is for the front of the vehicle. The listing names the GSR trim. Order it as part number KLC139.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. Working on the same car? We also list Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and Front and Rear Sway Bar Kit for the Lancer Evolution.
Features
- Responsiveness: Sharpens the car's reaction in lane changes and through corners.
- Hardware: Supplied with locking nuts and washers.
- Material: Steel construction.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Warranty: Whiteline's listed warranty is 3 years and 60,000 miles.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 2008-2015 Mitsubishi Lancer Evolution GSR |
| Drivetrain | AWD |
| Chassis Code | CY |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |