Product Details
These Whiteline 16mm Adjustable Front Camber Bolts fit the 2005-2006 Honda CR-V SE. Placement: front. The part number is KCA416. You receive 2 bolts. Trim named on the listing: SE.
These bolts are a simple way to get adjustment where the factory provided none. They bolt in where a standard fastener sits, and once the alignment is set a toothed lock washer keeps it from creeping, so the angle stays where the shop left it.
Installation is rated moderate, with about 1 hour of work listed. An alignment is required after installation. To go with it on the CR-V, see Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and Rear Control Arm Lower Rear Inner Bushing.
Features
- Corrosion protection: Plated finish keeps rust off the hardware.
- Install guide: Step-by-step installation instructions come with it.
- Hardware: The matching nuts are included.
- Locking washer: The teeth on the lock washer keep the bolt from turning once it is tightened.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
Specifications
| Part Number | KCA416 |
| Part Name | Camber Bolt |
| Vehicle | 2005-2006 Honda CR-V SE |
| Chassis Code | RD4 |
| Drivetrain | AWD/FWD |
| Adjustable | Yes |
| Adjustable Angle | Yes |
| Adjustment Type | Camber |
| Bolt Thread Diameter | 16 mm |
| Color | Gray |
| Grade Type | OEM Performance |
| Grade Type | Performance |
| Grade Type | Premium |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |