Product Details
These Whiteline 14mm Adjustable Front Camber Bolts fit the 1997-2003 Infiniti QX4. It goes on the front of the vehicle. In the box: 2 bolts. Application note: Adds +/- 0.75 degrees Camber. Whiteline part number: KCA414.
Camber is how far the top of the wheel leans in or out when you look at the car from the front, and it decides how the tire meets the road. Many cars leave little or no room to change it at the factory. A camber bolt replaces a standard mounting bolt with an adjustable one, so an alignment shop can move the setting into a better range.
Whiteline rates the install as difficult and lists about 1 hour. An alignment is required after installation. Other Whiteline parts we list for the Infiniti QX4: Front Control Arm Lower Inner Rear Bushing, Front Sway Bar Link, and Front Sway Bar Link Bushing (28.5mm OD).
Features
- Camber adjustment: Aims to keep camber in an effective range as the body rolls.
- Install guide: An install guide comes in the box.
- Locking washer: A toothed lock washer secures the adjustment.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Hardware: Nuts are supplied with the bolts.
Specifications
| Part Number | KCA414 |
| Part Name | Camber Bolt |
| Vehicle | 1997-2003 Infiniti QX4 |
| Chassis Code | WD21 |
| Drivetrain | 4WD/RWD |
| Adjustable | Yes |
| Bolt Thread Diameter | 14 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |
Fitment for QX4 camber bolts
Fits the 1997-2003 Infiniti QX4. Each model year is listed below.