Product Details
This Whiteline Transmission Mount Bushing fits the 1985-1986 Chevrolet K5 Blazer (C/K). Whiteline's note for this fit: Top center. Whiteline part number: W93472. In the box: 1 mount, 1 plate, 2 bolts, and 4 washers.
The transmission is held in the chassis by a mount that absorbs vibration. A soft or worn mount lets the gearbox rock when you shift or get on and off the throttle, which feels like a jerk, a clunk, or a delay. A firmer mount or bushing limits that motion. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. We also list Body Mount Bushing Kit, Front Upper and Lower Control Arm Bushing Kit, and Front Sway Bar Link Bushing Kit for the K5 Blazer.
Features
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
- Install guide: Written install instructions are included with the part.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Hardware: The kit includes mounting hardware.
Specifications
| Part Number | W93472 |
| Part Name | Transmission Mount Bushing |
| Vehicle | 1985-1986 Chevrolet K5 Blazer |
| Drivetrain | 4WD |
| Chassis Code | C/K |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Durometer | 72 |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 1 Mount, 1 Plate, 2 Bolts, 4 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | Yes |
| Wheel Alignment Required | No |
| Notes | Top center - center bolt holes 7.5 INCH |