Product Details
This Whiteline Rear Upper Inner Control Arm Bushing Kit fits the 2009-2018 Ford Focus SEL (C307/C346). In the box: 2 shell bushings and 2 tubes. Order it as part number KCA394. This part is for the rear of the vehicle. Whiteline's note for this fit: Suits cast arm. On-car adjustable allows +/-1.0 degrees Camber.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Expect a moderate job of about 2 hours. Plan on a wheel alignment afterward. To go with it on the Focus, see Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Adjustable Sway Bar Vehicle Link Kit.
Features
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Material: Made from polyurethane.
- Install guide: Whiteline packs an install guide with it.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | KCA394 |
| Part Name | Control Arm Bushing |
| Vehicle | 2009-2018 Ford Focus SEL |
| Drivetrain | FWD |
| Chassis Code | C307/C346 |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing 2 Outer Diameter | 36.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 38 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits cast arm. On-car adjustable allows +/-1.0Degree Camber; |



