Product Details
This Whiteline Rear Upper Inner Control Arm Bushing Kit fits the 2002-2006 Ford Focus ZX5 (C170). Order it as part number KCA394. You receive 2 shell bushings and 2 tubes. Application note: Suits cast arm. On-car adjustable allows +/-1.0 degrees Camber. It goes on the rear of the vehicle.
Most factory control arm bushings are centered and fixed. An offset one is built so the arm sits at a slightly different angle, which changes camber, and the firmer material stops that setting drifting under load.
Expect a moderate job of about 2 hours. An alignment is required after installation. We also list Adjustable Front Sway Bar Link, Rear Sway Bar Link, and Heavy Duty Blade Adjustable 22mm Rear Sway Bar for the Focus.
Features
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Bonded design: A bonded design adds strength for high load applications.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Install guide: Instructions for fitting are packed in the box.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
Specifications
| Part Number | KCA394 |
| Part Name | Control Arm Bushing |
| Vehicle | 2002-2006 Ford Focus ZX5 |
| Chassis Code | C170 |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing 2 Outer Diameter | 36.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 38 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits cast arm. On-car adjustable allows +/-1.0Degree Camber; |