Product Details
This Whiteline Rear Upper Inner Control Arm Bushing Kit fits the 2000 Ford Focus Sony Limited Edition (C170). Whiteline part number: KCA394. Application note: Suits cast arm. On-car adjustable allows +/-1.0 degrees Camber. In the box: 2 shell bushings and 2 tubes. Placement: rear. Chassis code: C170.
Most factory control arm bushings are centered and fixed. An offset one is built so the arm sits at a slightly different angle, which changes camber, and the firmer material stops that setting drifting under load.
Installation is rated moderate, with about 2 hours of work listed. An alignment is required after installation. To go with it on the Focus, see Adjustable Front Sway Bar Link, Rear Sway Bar Link, and Heavy Duty Blade Adjustable 22mm Rear Sway Bar.
Features
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Material: Built from polyurethane.
- Install guide: Step-by-step installation instructions come with it.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Finish: The metal is powder coated, which resists corrosion and wear.
Specifications
| Part Number | KCA394 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000 Ford Focus Sony Limited Edition |
| Chassis Code | C170 |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing 2 Outer Diameter | 36.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 38 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits cast arm. On-car adjustable allows +/-1.0Degree Camber; |