Product Details
This Whiteline Rear Upper Inner Control Arm Bushing Kit fits the 2000-2004 Ford Focus LX, ZTS (C170). Whiteline's note for this fit: Suits cast arm. On-car adjustable allows +/-1.0 degrees Camber. Position: rear. Chassis code: C170. The part number is KCA394. The kit contains 2 shell bushings and 2 tubes.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Installation is rated moderate, with about 2 hours of work listed. An alignment is required after installation. To go with it on the Focus, see Adjustable Front Sway Bar Link, Rear Sway Bar Link, and Heavy Duty Blade Adjustable 22mm Rear Sway Bar.
Features
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Material: Polyurethane construction.
- Camber adjustment: Aims to keep camber in an effective range as the body rolls.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Bonded design: The bushing is bonded for strength where loads are highest.
Specifications
| Part Number | KCA394 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2004 Ford Focus LX, ZTS |
| Chassis Code | C170 |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing 2 Outer Diameter | 36.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 38 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits cast arm. On-car adjustable allows +/-1.0Degree Camber; |