Product Details
This Whiteline Front Sway Bar Link fits the 1989-1990 Nissan 240SX XE (S13). Whiteline part number: KLC107. It goes on the front of the vehicle. The kit contains 2 links. Application note: Adjustable Extra Heavy Duty.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. A wheel alignment is not required. Other Whiteline parts we list for the 240SX: Rear Subframe Mount Bushing, Front and Rear Sway Bar Kit, and Rear Sway Bar Link.
Features
- Install guide: Step-by-step installation instructions come with it.
- Compliance voids: Voids molded into the bushing allow suspension articulation and soften sharp road inputs.
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
- Material: The part is made of steel.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
Specifications
| Part Number | KLC107 |
| Part Name | Sway Bar Link |
| Vehicle | 1989-1990 Nissan 240SX XE |
| Chassis Code | S13 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 85-95 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 85-95mm. |



