Product Details
This Whiteline Rear Subframe Mount Bushing fits the 1989-1990 Nissan 240SX XE (S13). Position: rear. Included: 4 shell bushings. Chassis code: S13. Order it as part number W92446.
Rubber subframe mounts compress and stretch every time the car loads up, and the subframe moves with them. Reducing that lost motion tends to show up as steadier tracking and a more immediate rear end in corners.
Installation is rated moderate, with about 4 hours of work listed. An alignment is required after installation. To go with it on the 240SX, see Front and Rear Sway Bar Kit, Rear Sway Bar Link, and Front Sway Bar Washer Kit.
Features
- Compliance voids: Molded voids give the bushing room to flex where it needs to.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Serviceable: A grease fitting is included, so the part can be re-greased as it ages.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W92446 |
| Part Name | Subframe Mount Bushing |
| Vehicle | 1989-1990 Nissan 240SX XE |
| Chassis Code | S13 |
| Bushing Color | Black |
| Bushing Height | 76.6 mm |
| Bushing Inside Diameter | 22.3 mm |
| Bushing Material | Polyurethane |
| Bushing Outside Diameter | 66.3 mm |
| Color | Black |
| Durometer | 72 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | Yes |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 4 |
| Kit Contents | 4 Shell Bushings |
| Material | Polyurethane |
| Mounting Brackets Included | No |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |


