Product Details
This Whiteline Front Lower Inner Control Arm Bushing fits the 2011-2015 Nissan Xterra PRO-4X (N50). Included: 4 shell bushings, 4 tubes, and 8 washers. Position: front. Whiteline part number: W53272. Application note: Standard Replacement.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated difficult, with about 4 hours of work listed. Plan on a wheel alignment afterward. To go with it on the Xterra, see Front Sway Bar Link Assembly, Rear Essential Vehicle Kit, and Front Upper Control Arm Set - Fixed Offset.
Features
- Bonded design: The bushing is bonded for strength where loads are highest.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Install guide: Whiteline packs an install guide with it.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Material: Made from polyurethane.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
Specifications
| Part Number | W53272 |
| Part Name | Control Arm Bushing |
| Vehicle | 2011-2015 Nissan Xterra PRO-4X |
| Drivetrain | RWD/4WD |
| Chassis Code | N50 |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 43 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 4 |
| Kit Contents | 4 Shell Bushings, 4 Tubes, 8 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |


