Whiteline 12mm Adjustable Front Camber Bolts for 1993-1997 Toyota Corolla DX (E100) KCA412
Whiteline Front Camber Adjusting Bolt - 1993-1997 Toyota Corolla DX KCA412
Whiteline Front Camber Adjusting Bolt - 1993-1997 Toyota Corolla DX KCA412

Whiteline

|

SKU: KCA412

Whiteline 12mm Adjustable Front Camber Bolts for 1993-1997 Toyota Corolla DX (E100)

$47.59

MSRP $52.88 You save $5.29

Ask a question
In stock, ready to ship

Authorized DealerGenuine parts & warranty
20+ Years in BusinessTrusted since 2005
Free USA ShippingOn orders $250+
Best Price GuaranteeWe’ll match or beat it
Fitment Notes

All fitment information on our website is provided by the manufacturer. It is the customer's responsibility to thoroughly read the product description and confirm fitment before placing an order and proceeding with installation.

Unless specified otherwise, all suspension products are designed for 2WD vehicles only. Any notes or descriptions related to electronic damping systems (EDC, DDS, etc.) apply strictly to vehicle fitment. Aftermarket coilovers are not compatible with OEM electronic damping control systems unless explicitly stated.

*Product images may not represent the actual SKU.

Handling Time

All handling times are estimates and may change at any time.

  • In-Stock: 1 business day
  • Out of Stock: 3-4 weeks
30-Day Returns

Not quite right? No problem — we offer hassle-free 30-day returns on eligible items. A few exclusions apply.

More Information

Lifetime Manufacturer Warranty

All Whiteline products, except those listed below, are covered by a lifetime warranty against manufacturing defects in material and workmanship, valid for the original vehicle the product was installed on.

Whiteline Ball Joints, Tie Rod Ends, Bearings, Links and Springs are covered for 3 years or 60,000 km (36,000 miles), whichever comes first.

Exclusions
The warranty does not cover:

  • Incorrect installation or misuse.
  • Modification or alteration of parts.
  • Damage due to competition, motorsport, or off-road use.
  • Wear and tear from normal use.
  • Accidental or collision damage.

More Information

Product Details

Here are the Whiteline 12mm Adjustable Front Camber Bolts for the 1993-1997 Toyota Corolla DX (E100). The kit contains 2 bolts. Part number KCA412. Placement: front. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber.

These bolts are a simple way to get adjustment where the factory provided none. They bolt in where a standard fastener sits, and once the alignment is set a toothed lock washer keeps it from creeping, so the angle stays where the shop left it.

Installation is rated difficult, with about 1 hour of work listed. Plan on a wheel alignment afterward. We also list Adjustable Rear Sway Bar Link, Front Sway Bar Washer Kit, and Front Strut Tower Brace Quick Release Kit for the Corolla.

Features

  • Corrosion protection: Plated finish keeps rust off the hardware.
  • Hardware: Nuts are supplied with the bolts.
  • Camber adjustment: Designed to optimize camber alignment and offset the effect of body roll and tire roll in corners.
  • Locking washer: A toothed lock washer secures the adjustment.
  • Install guide: Whiteline packs an install guide with it.
Specifications
Part Number KCA412
Part Name Camber Bolt
Vehicle 1993-1997 Toyota Corolla DX
Chassis Code E100
Adjustable Yes
Bolt Thread Diameter 12 mm
Color Gray
Installation Difficulty Difficult
Installation Time (hrs) 1
Kit Contents 2 Bolts
Nut Included Yes
Vehicle Placement Front
Wheel Alignment Required Yes
Notes Adds +/- 0.75 Degree Camber

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1993ToyotaCorollaFWDAdds +/- 0.75 Degree Camber
1994ToyotaCorollaFWDAdds +/- 0.75 Degree Camber
1995ToyotaCorollaFWDAdds +/- 0.75 Degree Camber
1996ToyotaCorollaFWDAdds +/- 0.75 Degree Camber
1997ToyotaCorollaFWDAdds +/- 0.75 Degree Camber

Customer Reviews

Questions & Answers