Product Details
Whiteline built the 12mm Adjustable Front Camber Bolts for the 1989-1991 Toyota Corolla GTS, SR5 (E90). You receive 2 bolts. Application note: Adds +/- 0.75 degrees Camber. It goes on the front of the vehicle. Order it as part number KCA412.
Camber is how far the top of the wheel leans in or out when you look at the car from the front, and it decides how the tire meets the road. Many cars leave little or no room to change it at the factory. A camber bolt replaces a standard mounting bolt with an adjustable one, so an alignment shop can move the setting into a better range.
Expect a difficult job of about 1 hour. Get the car aligned once it is back on the ground. To go with it on the Corolla, see Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and Front Sway Bar Washer Kit.
Features
- Locking washer: A toothed lock washer holds the setting without relying on friction alone.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Install guide: Step-by-step installation instructions come with it.
- Hardware: The matching nuts are included.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 1989-1991 Toyota Corolla GTS, SR5 |
| Chassis Code | E90 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |