Product Details
These Whiteline 12mm Adjustable Front Camber Bolts fit the 1987-1990 Mazda RX-7 GXL 2+2 (FC). It goes on the front of the vehicle. You receive 2 bolts. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber. Order it as part number KCA412.
Camber is how far the top of the wheel leans in or out when you look at the car from the front, and it decides how the tire meets the road. Many cars leave little or no room to change it at the factory. A camber bolt replaces a standard mounting bolt with an adjustable one, so an alignment shop can move the setting into a better range.
Installation is rated difficult, with about 1 hour of work listed. Get the car aligned once it is back on the ground. To go with it on the RX-7, see Front Control Arm Lower Inner Front Bushing, Tie Rod Boot Kit, and Rear Upper Outer Control Arm Bushing Kit.
Features
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Locking washer: The teeth on the lock washer keep the bolt from turning once it is tightened.
- Hardware: Nuts are supplied with the bolts.
- Install guide: Instructions for fitting are packed in the box.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 1987-1990 Mazda RX-7 GXL 2+2 |
| Chassis Code | FC |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |