Product Details
This Whiteline Rear Sway Bar Link fits the 2013-2014 Land Rover LR4 HSE Lux. Position: rear. Order it as part number KLC180-115. The listing names the HSE Lux trim. Whiteline's note for this fit: Adjustable Extra Heavy Duty. In the box: 2 links.
The rear sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. To go with it on the Land Rover LR4, see Front Control Arm Lower Inner Front Bushing.
Features
- Hardware: Hardware supplied: locking nuts and washers.
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Construction: Alloy construction keeps the weight down while handling the loads.
- Install guide: Instructions for fitting are packed in the box.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
Specifications
| Part Number | KLC180-115 |
| Part Name | Sway Bar Link |
| Vehicle | 2013-2014 Land Rover LR4 HSE Lux |
| Chassis Code | L319 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 110-135 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | No |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 110-135mm. Bolt Diameter 12mm. |