Product Details
This Whiteline Rear Sway Bar Link fits the 2010 Land Rover LR4 V8. Trim named on the listing: V8. This part is for the rear of the vehicle. The part number is KLC180-115. In the box: 2 links. The chassis code on the listing is L319. Application note: Adjustable Extra Heavy Duty.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. Other Whiteline parts we list for the Land Rover LR4: Front Control Arm Lower Inner Front Bushing.
Features
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Install guide: Written install instructions are included with the part.
- Hardware: The kit includes locking nuts and washers.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Construction: High-strength alloy gives the strength needed without much weight.
Specifications
| Part Number | KLC180-115 |
| Part Name | Sway Bar Link |
| Vehicle | 2010 Land Rover LR4 V8 |
| Chassis Code | L319 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 110-135 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | No |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 110-135mm. Bolt Diameter 12mm. |