Product Details
This Whiteline Rear Upper Inner Bushing Offset Camber Kit fits the 2007-2012 Mitsubishi Outlander. Whiteline's note for this fit: Adds +/- 0.5 degrees Camber. The chassis code on the listing is CU. Included: 2 shell bushings and 2 tubes. Placement: rear. The part number is KCA329.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Installation is rated moderate, with about 3 hours of work listed. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Outlander: Front Control Arm Lower Inner Rear Bushing, Adjustable Front Sway Bar Link, and 14mm Adjustable Front Camber Bolts.
Features
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Install guide: Step-by-step installation instructions come with it.
- Material: Built from polyurethane.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Finish: Powder coating covers the metal for protection against chips and rust.
Specifications
| Part Number | KCA329 |
| Part Name | Bushing Camber Kit |
| Vehicle | 2007-2012 Mitsubishi Outlander |
| Chassis Code | CU |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 36.5 mm |
| Bushing 2 Outer Diameter | 36 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 36.5 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5Degree Camber |