Product Details

These Yellow Speed Pro Drift coilovers fit the 2007-2012 BMW 1 Series (E81). They are purpose-built for competitive drifting and aggressive street driving. Featuring drift-specific valving designed to provide predictable, controllable slide characteristics, this coilover system allows drivers to maintain precise throttle-steer balance through extended drift angles.

The Dynamic Pro Drift system is engineered with reinforced internals to withstand the extreme lateral loads and sustained high-angle driving typical of drift use. Damping and ride height are adjustable to match driver preference, track conditions and vehicle setup.

Each Yellow Speed Racing Dynamic Pro Drift coilover system is built to order, ensuring precise assembly and quality control. The adjustable platform allows for fine-tuning of both compression and rebound characteristics to optimize weight transfer and chassis rotation.

Features

  • Drift-specific valving for predictable slide characteristics
  • Reinforced body design for extreme lateral loads
  • Height adjustable for stance and weight distribution tuning
  • Damping adjustable for customizable response
  • Built-to-order for precise fitment and quality assurance
  • Designed for competitive drifting, grassroots events, and aggressive street driving

Performance Characteristics

  • Predictable and controllable oversteer behavior
  • Smooth weight transfer for consistent drift initiation
  • Adjustable chassis rotation and throttle-steer balance
  • Durable under sustained high-angle driving and competition use

Things to Consider

  • Significantly firmer than street-oriented suspension setups
  • Optimized for RWD drift applications. Characteristics may vary with AWD/FWD platforms
  • Not intended for comfort-oriented daily driving

Specifications

Part Number YS01-BM-DPD025
Part Name Yellow Speed Pro Drift Coilovers
Vehicle 2007-2012 BMW 1 Series
Chassis Code E81
Drivetrain RWD
Strut Type - Front Inverted
Strut Type - Rear Standard
Suspension Design - Front True Coilover
Suspension Design - Rear True Coilover
Upper Mount - Front Pillowball Upper Mount with Camber Plate
Upper Mount - Rear N/A
Spring Rate - Front 10 Kg/mm
Spring Rate - Rear 10 Kg/mm
Damping Adjustment 1-Way
Custom Spring Rates Available upon request
Notes Hatchback (3-door); 110nm Torque required for rear lower mount

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2007BMW116dRWDHatchback (3-door); 110nm Torque required for rear lower mount
2007BMW116iRWDHatchback (3-door); 110nm Torque required for rear lower mount
2007BMW118dRWDHatchback (3-door); 110nm Torque required for rear lower mount
2007BMW118iRWDHatchback (3-door); 110nm Torque required for rear lower mount
2007BMW120dRWDHatchback (3-door); 110nm Torque required for rear lower mount
2007BMW120iRWDHatchback (3-door); 110nm Torque required for rear lower mount
2007BMW123dRWDHatchback (3-door); 110nm Torque required for rear lower mount
2007BMW130iRWDHatchback (3-door); 110nm Torque required for rear lower mount
2008BMW116dRWDHatchback (3-door); 110nm Torque required for rear lower mount
2008BMW116iRWDHatchback (3-door); 110nm Torque required for rear lower mount
2008BMW118dRWDHatchback (3-door); 110nm Torque required for rear lower mount
2008BMW118iRWDHatchback (3-door); 110nm Torque required for rear lower mount
2008BMW120dRWDHatchback (3-door); 110nm Torque required for rear lower mount
2008BMW120iRWDHatchback (3-door); 110nm Torque required for rear lower mount
2008BMW123dRWDHatchback (3-door); 110nm Torque required for rear lower mount
2008BMW130iRWDHatchback (3-door); 110nm Torque required for rear lower mount
2009BMW116dRWDHatchback (3-door); 110nm Torque required for rear lower mount
2009BMW116iRWDHatchback (3-door); 110nm Torque required for rear lower mount
2009BMW118dRWDHatchback (3-door); 110nm Torque required for rear lower mount
2009BMW118iRWDHatchback (3-door); 110nm Torque required for rear lower mount

Customer Reviews

Questions & Answers