Product Details
This Whiteline Rear Upper Inner Control Arm Bushing Kit fits the 2005-2011 Volvo V50 (P1). Order it as part number KCA394. Whiteline's note for this fit: Suits cast arm. On-car adjustable allows +/-1.0 degrees Camber. In the box: 2 shell bushings and 2 tubes. It goes on the rear of the vehicle.
Most factory control arm bushings are centered and fixed. An offset one is built so the arm sits at a slightly different angle, which changes camber, and the firmer material stops that setting drifting under load.
Whiteline rates the install as moderate and lists about 2 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Volvo V50: Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Adjustable Front Sway Bar Link.
Features
- Finish: The metal parts are powder coated for durability.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Camber adjustment: Helps keep camber in range so the tire holds its footprint through a corner.
- Corrosion protection: Rust protection comes from plating on the metal parts.
Specifications
| Part Number | KCA394 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005-2011 Volvo V50 |
| Chassis Code | P1 |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing 2 Outer Diameter | 36.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 38 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits cast arm. On-car adjustable allows +/-1.0Degree Camber; |


