Product Details
This page covers the Whiteline Rear Lower Trailing Arm Bushing for the 2019 Subaru BRZ Series.Gray (ZN6). Trim named on the listing: Series.Gray. Placement: rear. Order it as part number W63582. You receive 4 bushings, 2 tubes, an install guide, and grease.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired trailing arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2 hours. Get the car aligned once it is back on the ground. To go with it on the Subaru BRZ, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Sway Bar Vehicle Link Kit.
Features
- Easy to fit: Installation does not call for special skills or tools.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Compliance voids: Molded voids give the bushing room to flex where it needs to.
- Material: Polyurethane construction.
Specifications
| Part Number | W63582 |
| Part Name | Trailing Arm Bushing |
| Vehicle | 2019 Subaru BRZ Series.Gray |
| Chassis Code | ZN6 |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2 |
| Kit Contents | 4 Bushings, 2 Tubes, Install Guide, Grease |
| Material | Polyurethane |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |