Product Details
This Whiteline Rear Trailing Arm Center Pivot Bushing Kit fits the 1994-2001 Acura Integra. Part number W63621. The kit contains 2 bushings and grease. Application note: Must reuse original mount pin and shell. It goes on the rear of the vehicle.
A trailing arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated moderate, with about 4 hours of work listed. An alignment is required after installation. To go with it on the Integra, see Front Upper Control Arm Bushing Kit, 24mm Sway Bar Mount Bushing Kit, and Steering Rack and Pinion Mount Bushing Kit.
Features
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Install guide: Step-by-step installation instructions come with it.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Material: Polyurethane construction.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
Specifications
| Part Number | W63621 |
| Part Name | Trailing Arm Bushings |
| Vehicle | 1994-2001 Acura Integra |
| Chassis Code | DC2/DB8 |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 4 |
| Kit Contents | 2 Bushings, Grease |
| Material | Polyurethane |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Must reuse original mount pin and shell. |