Product Details
This Whiteline Rear Toe Link Bushing fits the 2008-2010 Dodge Challenger SRT8 Base (LC). The part number is W63345. It goes on the rear of the vehicle. In the box: 4 shell bushings, 4 tubes, and 6 washers.
Links in the rear suspension locate the wheel or axle, and each one pivots on a bushing. When the bushing is worn, the link moves more than it should, and alignment and stability change under load. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 4 hours of work listed. An alignment is required after installation. Other Whiteline parts we list for the Challenger SRT8: Front and Rear Sway Bar Kit, Rear Trailing Arm Lower Front Bushing, and Rear Subframe Mount Bushing.
Features
- Corrosion protection: Plated finish keeps rust off the hardware.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Install guide: Step-by-step installation instructions come with it.
- Finish: A powder coated finish resists corrosion and wear.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
Specifications
| Part Number | W63345 |
| Part Name | Toe Link Bushing |
| Vehicle | 2008-2010 Dodge Challenger SRT8 Base |
| Drivetrain | RWD |
| Chassis Code | LC |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 40.3 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 4 |
| Kit Contents | 4 Shell Bushings, 4 Tubes, 6 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Wheel Alignment Required | Yes |
| Notes | - |




