Product Details
This Whiteline Rear Toe Link Bushing fits the 2006-2010 Dodge Charger SRT8 Base (LX). In the box: 4 shell bushings, 4 tubes, and 6 washers. Placement: rear. Part number W63345.
A worn link bushing lets the rear end move in ways the suspension was not designed to allow. Fresh bushings restore the pivot and quiet the noises that come from it. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 4 hours. Get the car aligned once it is back on the ground. We also list Front and Rear Sway Bar Kit, Rear Trailing Arm Lower Front Bushing, and Rear Subframe Mount Bushing for the Charger SRT8.
Features
- Bonded design: A bonded design adds strength for high load applications.
- Install guide: An install guide comes in the box.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Finish: Powder coat finish guards the metal against chips and corrosion.
Specifications
| Part Number | W63345 |
| Part Name | Toe Link Bushing |
| Vehicle | 2006-2010 Dodge Charger SRT8 Base |
| Drivetrain | RWD |
| Chassis Code | LX |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 40.3 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 4 |
| Kit Contents | 4 Shell Bushings, 4 Tubes, 6 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Wheel Alignment Required | Yes |
| Notes | - |



